news_events

Supercapacitor Calculator

SPEL offers wide selection range of Supercapacitors ranging from single cells to modules of voltage upto 700VDC for various applications. In order to size the appropriate Supercapacitor capacity for any application, we need to be clear on following parameters
  • Maximum Charged Voltage (Vmax), if different from Working Voltage then also (Vw)
  • Minimum permisble load Voltage (Vmin)
  • Required Current (I)
  • Desired Backup time (t)
  • Duty Cycle
  • Average Operating Temperature
  • The last two parameters are used to determine the life degradation factor which is not discussed here but it's consideration is desired. Below provided calculator is an attempt and guide to assist user to determine exact capacity/value of Supercapacitor for his desired application.


    news_events
    Enter Rated working Voltage (VDCmax):  
     
    Enter Required Current (AMPERE):  
     
    Enter Minimum Voltage (VDCmin):  
     
    Enter Required Back-up time (SECONDS):  
     

    Required Supercapacitor in FARADS

    Resultant Impedance in OHMS

    Resources

    SPEL haves Expertise to develop support and integrate Supercapacitor for optimization of any existing and new Applications

    Supercapacitor Internal View

    Supercapacitor Internal layout for Cyclindrical type, and Prismatic type construction

    HEV Powertrain

    Hybrid Electrical Vehicle Powertrain Management layout using SPEL Supercapacitor

    Data-Sheets

    SPEL haves Expertise to develop support and integrate Supercapacitor for optimization of any existing and new Applications

    Wind Power Series

    Wind Power Series Typical 16 VDC, 58.0 Farads (WP016R058F) for Wind Turbine pitch Control.

    PB Series

    Power Backup Series Ranging from 12.0 VDC to 72.0 VDC for Intermidate Power backup support in Power Plants, and other crtical applications.

    PHC Series

    Single Cell Voltage 3.0 VDC Capacity ranging from 2000 Farads to 6000 Farads, low ESR Prismatic Construction for High Current applications.

    CHC Series

    Single Cell Voltage 2.8 VDC/ 3.0 VDC Capacity ranging upto 3000 Farads, low ESR Cyclindrical Construction for Regular/Special applications.

    HVB Series

    High Voltage Power Backup Series, Modules Ranging from 72.0 VDC to 190.0 VDC for Power backup/Pluse Power, and other crtical applications.

    RGE Series

    Regenerative Energy Capturing application in Automobiles, Port Cranes, etc. Modules for Voltage upto 300 VDC